Solvent swelling studies of Göynük (Kerogen Type-I) and Beypazar? oil shales (Kerogen Type-II)

The volumetric swelling procedure was applied to Göynük and Beypazar? oil shales from Turkey by using 10 solvents and the cross-linking in the macromolecular network of oil shales were investigated using this technique. Results from solvent swelling measurements show that the volumetric solvent swelling of oil shales samples roughly follows the regular solution theory. The theory of solvent swelling of cross-linked polymers developed Flory-Rehner and extension of this theory by Kovac-Peppas was used to calculate number average molecular weight per cross-link of kerogen structure in oil shale samples. Results indicate no remarkable difference between values for Göynük oil shale (Kerogen Type I) and Beypazar? oil shale (Kerogen Type II).     

Capacitive micromachined ultrasonic transducers with diffraction-based integrated optical displacement detection

Capacitive detection limits the performance of capacitive micromachined ultrasonic transducers (CMUTs) by providing poor sensitivity below megahertz frequencies and limiting acoustic power output by imposing constraints on the membrane-substrate gap height. In this paper, an integrated optical interferometric detection method for CMUTs, which provides high displacement sensitivity independent of operation frequency and device capacitance, is reported. The method also enables optoelectronics integration in a small volume and provides optoelectronic isolation between transmit and receive electronics. Implementation of the method involves fabricating CMUTs on transparent substrates and shaping the electrode under each individual CMUT membrane in the form of an optical diffraction grating. Each CMUT membrane thus forms a phase-sensitive optical diffraction grating structure that is used to measure membrane displacements down to 2/spl times/10/sup -4/ /spl Aring///spl radic/Hz level in the dc to 2-MHz range. Test devices are fabricated on quartz substrates, and ultrasonic array imaging in air is performed using a single 4-mm square CMUT consisting of 19/spl times/19 array of membranes operating at 750 kHz.     

Acceleration of direct volume rendering with programmable graphics hardware

We propose a method to accelerate direct volume rendering using programmable graphics hardware (GPU). In the method, texture slices are grouped together to form a texture slab. Rendering non-empty slabs from front to back viewing order generates the resultant image. Considering each pixel of the image as a ray, slab silhouette maps (SSMs) are used to skip empty spaces along the ray direction per pixel basis. Additionally, SSMs contain terminated ray information. The method relies on hardware z-occlusion culling and hardware occlusion queries to accelerate ray traversals. The advantage of this method is that SSMs are created on the fly by the GPU without any pre-processing. The cost of generating the acceleration structure is very small with respect to the total rendering time.     

Determination of neotectonic features of the Karasu Basin (SE Turkey) and their relationship with Quaternary volcanic activity using Landsat ETM+ imagery

The junction between the East Anatolian and the Dead Sea fault zones lies close to an unstable F: Transform fault (FFF) triple junction where the African, Eurasian and Arabian plates meet in south-eastern Turkey. The Karasu Basin is an ephemeral rifted structure located close to the junction of these plate boundaries and is expressed by a range of tectono-morphological features. This study uses remote sensing to define tectonic structures and discriminate volcanic rocks linked to rifting within the basin using Landsat Enhanced Thematic Mapper Plus (ETM+) imagery. Prior to advanced image processing stages, images were corrected to eliminate atmospheric scattering effects and determine the best band combination for multi-spectral processing techniques based on statistical methods. Following pre-processing stages, edge detection filters were applied to derive tectonic structures defining the basin. The Brovey transformation, a statistical data merging method, was used to combine reflective multi-spectral bands with the Landsat ETM+?panchromatic band. This method fuses higher spatial data with data of lower spatial value. The western margin of the Karasu Basin is defined by the left-lateral Amanos Fault Zone with a contemporary motion (c. –0.4 mm a^?1) probably accommodating most of the left-lateral strike-slip motion between Arabian and African plates on the northern continuation of the Dead Sea Fault Zone. The rift zone has been the site of extensive recent volcanism concentrated within the Brunhes Chron (<0.78 Ma) and linked to fault block rotations between the intracontinental master faults. The boundaries of this activity are defined here using a regolith mapping technique.     

Item response theory modeling of substance use: An index based on 10 drug categories.

This study examined the psychometric characteristics of an index of substance use involvement using item response theory. The sample consisted of 292 men and 140 women who qualified for a Diagnostic and Statistical Manual of Mental Disorders (3rd ed., rev.; American Psychiatric Association, 1987) substance use disorder (SUD) diagnosis and 293 men and 445 women who did not qualify for a SUD diagnosis. The results indicated that men ha4 a higher probability of endorsing substance use compared with women. The index significantly predicted health, psychiatric, and psychosocial disturbances as well as level of substance use behavior and severity of SUD after a 2-year follow-up. Finally, this index is a reliable and useful prognostic indicator of the risk for SUD and the medical and psychosocial sequelae of drug consumption. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Amperometric alcohol biosensors based on conducting polymers: Polypyrrole,poly(3,4-ethylenedioxythiophene) and poly(3,4-ethylenedioxypyrrole)

Alcohol biosensors based on conducting polypyrrole (PPy), poly(3,4-ethylenedioxythiophene) (PEDOT) and poly(3,4-ethylenedioxypyrrole) (PEDOP) were constructed. Alcohol oxidase (AlcOx, from Pichia pastoris) was immobilized during electropolymerization of the monomers in sodium dodecylsulfate (SDS) and phosphate buffer electrolysis medium. Optimization of several parameters was carried out. The highest affinity was observed for the PEDOT/AlcOx sensor. Lowry protein determination method was also used to calculate the amount of immobilized enzyme in sensors. Before testing the biosensors on alcoholic beverages effects of interferents (glucose, acetic acid, citric acid, and l-ascorbic acid) were determined. The alcohol contents of the distilled beverages (vodka, dry cin, whisky, and rak?) were determined with the sensors constructed. A good match with the chromatography results was observed.     

Synthesis and characterization of poly(N-(2-(thiophen-3-yl)methylcarbonyloxyethyl)maleimide) and its spectroelectrochemical properties

A new monomer; N-(2-(thiophen-3-yl)methylcarbonyloxyethyl) maleimide (NMT) was synthesized. The chemical structure of the monomer was characterized by Nuclear Magnetic Resonance (¹H-NMR) and Fourier Transform Infrared (FTIR) Spectroscopy. Electrochemical polymerization of NMT was performed in acetonitrile (AN)/borontrifloride ethylether (BFEE) solvent mixture (1:1, v/v) where tetrabutylammonium tetrafluoroborate (TBAFB) was utilized as the supporting electrolyte. The resulting conducting polymer was characterized by Fourier Transform Infrared (FTIR) Spectroscopy, thermal analyses and Scanning Electron Microscopy (SEM). Electrical conductivity was measured by the four-probe technique. The spectroelectrochemical behavior and switching ability of P(NMT) film were investigated by UV–Vis spectrophotometry. P(NMT) revealed color changes between yellow and blue in the reduced and oxidized states respectively.     

Determination of flavan-3-ols and trans-resveratrol in grapes and wine using HPLC with fluorescence detection

Concentrations of trans-resveratrol, catechin and epicatechin were analyzed in musts and wines produced from seven red and four white grape cultivars from various wine growing regions of Turkey. Phenolics were quantified using an HPLC method optimized for the separation of wine phenolics. Wine samples contained higher phenolics levels than the corresponding musts. With the exception of Semillion, white wines and musts contained lower concentrations of phenolics than red wines and musts. However, the white cultivar Semillion had the highest concentrations of catechin and epicatechin among all wine and must samples. Semillion wine catechin and epicatechin were 13.7 and 11.8 mg/L, respectively. The highest level of trans-resveratrol among the white cultivars was found in Narince wine (1.93 mg/L). Within the red wine and must cultivars, Bo?azkere, Öküzgozü, and Cabernet contained the highest concentrations of flavan-3-ols and trans-resveratrol. Catechin was the major phenolic in all wines and most musts. Epicatechin was the major phenolic in 6 of the 11 must samples, but none of the wine samples. trans-Resveratrol was generally found in lowest concentrations in both wines and musts.     

Numerical modelling of honeycomb core crush behaviour

In this work several numerical techniques for modelling the transverse crush behaviour of honeycomb core materials were developed and compared with test data on aluminium and Nomex™ honeycomb. The methods included a detailed honeycomb micromechanics model, a homogenised material model suitable for use in FE code solid elements, and a homogenised discrete/finite element model used in a semi-adaptive numerical coupling (SAC) technique. The micromechanics model is shown to be suitable for honeycomb design, since it may be used to compute crush energy absorption for different honeycomb cell sizes, cell wall thicknesses and cell materials. However, the very fine meshes required make it unsuitable for analysis of large sandwich structures. The homogenised FE model may be used for such structures, but gives poor agreement when failure is due to core crushing. The SAC model is shown to be most appropriate for use in structural simulations with extensive compression core crushing failures, since the discrete particles are able to model the material compaction during local crushing.